https://litreaircompressor.com Mon, 13 Apr 2026 11:28:57 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://litreaircompressor.com/2026/01/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v-2/ https://litreaircompressor.com/2026/01/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v-2/#comments Sun, 18 Jan 2026 15:59:42 +0000 https://litreaircompressor.com/2026/01/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v-2/





Clarke XE18/200 (WIS) 18cfm 200 Litre 4HP Industrial Air Compressor (400V) – 2092292. The Clarke XE18/200 (WIS) is a heavy-duty, three-phase air compressor designed for professional workshops and industrial environments. Delivering a high air displacement of 18cfm (510L/min) and fitted with a 200-litre air receiver, it’s built for reliability and continuous use. Powered by a 4HP 400V three-phase motor with a wired-in starter (WIS), this unit provides a consistent, powerful air supply for industrial workshops and garages, spray painting and pneumatic tools, manufacturing and production environments. 18cfm air displacement (510L/min) for high output. 4HP, 400V three-phase motor with direct-on-line wired starter. 200-litre air receiver – ideal for extended air demand. Maximum pressure: 10bar / 150psi. Twin-cylinder pump with aftercooler for cooler, drier air. Oil-lubricated system for durability and long service life. Automatic pressure switch control. Robust build suitable for permanent workshop installation. Tank capacity: 200 litres. Motor power: 4HP (3kW). Max pressure: 10bar / 150psi. Dimensions (L×W×H): 1460 × 470 × 910mm. Orders placed before 2pm will be dispatched on the same day.

]]> https://litreaircompressor.com/2026/01/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v-2/feed/ 0 https://litreaircompressor.com/2025/12/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v/ https://litreaircompressor.com/2025/12/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v/#comments Thu, 11 Dec 2025 02:42:42 +0000 https://litreaircompressor.com/2025/12/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v/





Clarke XE18/200 (WIS) 18cfm 200 Litre 4HP Industrial Air Compressor (400V) – 2092292. The Clarke XE18/200 (WIS) is a heavy-duty, three-phase air compressor designed for professional workshops and industrial environments. Delivering a high air displacement of 18cfm (510L/min) and fitted with a 200-litre air receiver, it’s built for reliability and continuous use. Powered by a 4HP 400V three-phase motor with a wired-in starter (WIS), this unit provides a consistent, powerful air supply for industrial workshops and garages, spray painting and pneumatic tools, manufacturing and production environments. 18cfm air displacement (510L/min) for high output. 4HP, 400V three-phase motor with direct-on-line wired starter. 200-litre air receiver – ideal for extended air demand. Maximum pressure: 10bar / 150psi. Twin-cylinder pump with aftercooler for cooler, drier air. Oil-lubricated system for durability and long service life. Automatic pressure switch control. Robust build suitable for permanent workshop installation. Tank capacity: 200 litres. Motor power: 4HP (3kW). Max pressure: 10bar / 150psi. Dimensions (L×W×H): 1460 × 470 × 910mm. Orders placed before 2pm will be dispatched on the same day.

]]> https://litreaircompressor.com/2025/12/clarke-xe18200-wis-18cfm-200-litre-4hp-industrial-air-compressor-400v/feed/ 0 https://litreaircompressor.com/2025/11/300-impressive-industrial-machines-operating-at-peak-efficiency/ https://litreaircompressor.com/2025/11/300-impressive-industrial-machines-operating-at-peak-efficiency/#comments Sat, 01 Nov 2025 12:14:05 +0000 https://litreaircompressor.com/2025/11/300-impressive-industrial-machines-operating-at-peak-efficiency/ ]]> https://litreaircompressor.com/2025/11/300-impressive-industrial-machines-operating-at-peak-efficiency/feed/ 0 https://litreaircompressor.com/2025/09/clarke-xev16200-industrial-air-compressor-14cfm-200-litre-3hp-ol-230v/ https://litreaircompressor.com/2025/09/clarke-xev16200-industrial-air-compressor-14cfm-200-litre-3hp-ol-230v/#comments Thu, 11 Sep 2025 20:27:14 +0000 https://litreaircompressor.com/2025/09/clarke-xev16200-industrial-air-compressor-14cfm-200-litre-3hp-ol-230v/












The Clarke XEV16/200 Industrial Air Compressor is a powerful and reliable tool for any workshop or DIY project. With a 3HP motor and 200L tank capacity, this oil-lubricated compressor can provide a maximum working pressure of 150 psi. The corded electric power source and stationary portability make it easy to use in any location. The set includes an oil sight glass, pressure gauge, manual drain valve, and pressure safety valve for added convenience and security. Ideal for a wide range of applications, this Clarke air compressor is a must-have for any home or workshop.

]]> https://litreaircompressor.com/2025/09/clarke-xev16200-industrial-air-compressor-14cfm-200-litre-3hp-ol-230v/feed/ 0 https://litreaircompressor.com/2025/07/clarke-industrial-air-compressor-xe37-270-ol-36cfm-270-litre-2-x-4hp-230v/ https://litreaircompressor.com/2025/07/clarke-industrial-air-compressor-xe37-270-ol-36cfm-270-litre-2-x-4hp-230v/#comments Sat, 12 Jul 2025 05:03:42 +0000 https://litreaircompressor.com/2025/07/clarke-industrial-air-compressor-xe37-270-ol-36cfm-270-litre-2-x-4hp-230v/


Clarke XE18/200 (OL) 18cfm 200Litre 4HP Industrial Air Compressor (230V). Many thanks for visiting our shop. Here you will find almost all of our sand blasting products that we sell. We have a wide range to choose from and we do our best to keep it all in stock. We do have a show room where our Cabinets, Pots and Tumblers are on display and we also stock all the consumables as well as a good range of blasting media for your needs. We are always learning ourselves but will always pass on any knowledge that we have picked up along the way and always do our best to advise you on what you need for your blasting requirements. There are 3 tabs at the bottom of the page for additional information which includes. The XE37/270 industrial air compressor provides the ideal solution for those operators requiring a greater volume of compressed air but are limited to 230V, 1-phase power supply. Air compressor is fitted with twin compressor pump & motor units to deliver up to 36cfm of compressed air for running most professional spray guns and air tools. Specification also includes safety valve, pressure gauge, air outlet valve & drain tap. It is recommended that this air compressor is fitted with heavy-duty anti vibration floor mountings. 36cfm air displacement from 2 x twin cylinder. 2 x 4HP, 230V single phase motors with overload protection (OL). Sequentially starting motors allow the unit to be run from 230V single phase power supply (45Amp minimum). 10.3bar (150psi) max. Working pressure controlled by fully automatic pressure switch. : 1570 x 515 x. If in doubt then PLEASE GET A QUOTE before purchasing an item. A signature is required for collection. Any changes to address after checkout will not be considered as valid. The courier may require your assistance unloading from the vehicle for heavy and bulky items. Please bare this in mind when ordering the larger heavier items. Our couriers deliver to the property entrance only. You have the right to cancel for any reason without penalty. To cancel a contract you must give us notice within 7 days starting from the day after you receive your order. You have a legal “duty of care” to take good care of the goods. You must return the goods to us at your expense to our address below. Please check with us before placing your order. Terms and Conditions of sales. All sales are subject to the following trading terms- these terms and conditions do not affect the consumer’s statutory rights. We guarantee that the goods that we supply will be to the correct specification as advertised, however we are unable to guarantee precise compatibility or suitability. It is the responsibility of the customer to check this prior to ordering. We try to insure that all information provided is as accurate as possible. We reserve the right to accept or reject any order for any reason whatsoever. No order will be considered binding unless and until it is accepted by us. We will give you an estimated date of dispatch for your order. All goods are offered subject to stocks and availability.

]]> https://litreaircompressor.com/2025/07/clarke-industrial-air-compressor-xe37-270-ol-36cfm-270-litre-2-x-4hp-230v/feed/ 0 https://litreaircompressor.com/2025/05/clarke-industrial-air-compressor-xe18-200-ol-18cfm-200litre-4hp-230v/ https://litreaircompressor.com/2025/05/clarke-industrial-air-compressor-xe18-200-ol-18cfm-200litre-4hp-230v/#comments Sat, 24 May 2025 10:29:47 +0000 https://litreaircompressor.com/2025/05/clarke-industrial-air-compressor-xe18-200-ol-18cfm-200litre-4hp-230v/














Clarke XE18/200 (OL) 18cfm 200Litre 4HP Industrial Air Compressor (230V). Many thanks for visiting our shop. Here you will find almost all of our sand blasting products that we sell. We have a wide range to choose from and we do our best to keep it all in stock. We do have a show room where our Cabinets, Pots and Tumblers are on display and we also stock all the consumables as well as a good range of blasting media for your needs. We are always learning ourselves but will always pass on any knowledge that we have picked up along the way and always do our best to advise you on what you need for your blasting requirements. There are 3 tabs at the bottom of the page for additional information which includes. This Clarke industrial duty air compressor range has a superb reputation for long term reliability and performance. The solid construction of this highly efficient, slow running V belt drive air compressor offers dependable service the world over for a huge number of commercial and industrial units. This air compressor must be run from a 40 Amp supply minimum. Dimensions (LWH) 1480 x 450 x 945mm. If in doubt then PLEASE GET A QUOTE before purchasing an item. A signature is required for collection. Any changes to address after checkout will not be considered as valid. The courier may require your assistance unloading from the vehicle for heavy and bulky items. Please bare this in mind when ordering the larger heavier items. Our couriers deliver to the property entrance only. You have the right to cancel for any reason without penalty. To cancel a contract you must give us notice within 7 days starting from the day after you receive your order. You have a legal “duty of care” to take good care of the goods. You must return the goods to us at your expense to our address below. Please check with us before placing your order. Terms and Conditions of sales. All sales are subject to the following trading terms- these terms and conditions do not affect the consumer’s statutory rights. We guarantee that the goods that we supply will be to the correct specification as advertised, however we are unable to guarantee precise compatibility or suitability. It is the responsibility of the customer to check this prior to ordering. We try to insure that all information provided is as accurate as possible. We reserve the right to accept or reject any order for any reason whatsoever. No order will be considered binding unless and until it is accepted by us. We will give you an estimated date of dispatch for your order. All goods are offered subject to stocks and availability.

]]> https://litreaircompressor.com/2025/05/clarke-industrial-air-compressor-xe18-200-ol-18cfm-200litre-4hp-230v/feed/ 0 https://litreaircompressor.com/2025/04/clarke-industrial-air-compressor-xev16-150-litre-tank-3hp-14-cfm-2092274/ https://litreaircompressor.com/2025/04/clarke-industrial-air-compressor-xev16-150-litre-tank-3hp-14-cfm-2092274/#comments Mon, 21 Apr 2025 21:21:41 +0000 https://litreaircompressor.com/2025/04/clarke-industrial-air-compressor-xev16-150-litre-tank-3hp-14-cfm-2092274/







The Clarke Industrial Air Compressor XEV16 is a reliable and powerful tool for inflating and deflating vehicles and other equipment. With a 150 litre tank capacity and a 3HP motor, this compressor delivers 14 CFM of air power for quick and efficient performance. The Clarke brand is known for quality and durability, making this air compressor a valuable addition to any garage or workshop. Please don’t hesitate to reach out should you have any questions.

]]> https://litreaircompressor.com/2025/04/clarke-industrial-air-compressor-xev16-150-litre-tank-3hp-14-cfm-2092274/feed/ 0 https://litreaircompressor.com/2025/03/clarke-industrial-air-compressor-xe29-270-ol-28cfm-270-litre-230v/ https://litreaircompressor.com/2025/03/clarke-industrial-air-compressor-xe29-270-ol-28cfm-270-litre-230v/#comments Wed, 12 Mar 2025 07:53:57 +0000 https://litreaircompressor.com/2025/03/clarke-industrial-air-compressor-xe29-270-ol-28cfm-270-litre-230v/


Clarke XE18/200 (OL) 18cfm 200Litre 4HP Industrial Air Compressor (230V). Many thanks for visiting our shop. Here you will find almost all of our sand blasting products that we sell. We have a wide range to choose from and we do our best to keep it all in stock. We do have a show room where our Cabinets, Pots and Tumblers are on display and we also stock all the consumables as well as a good range of blasting media for your needs. We are always learning ourselves but will always pass on any knowledge that we have picked up along the way and always do our best to advise you on what you need for your blasting requirements. There are 3 tabs at the bottom of the page for additional information which includes. The XE29 industrial air compressor provides the ideal solution for those operators requiring a greater volume of compressed air but are limited to 230V, 1-phase power supply. This heavy duty unit is fitted with twin air compressor pumps & motor units to displace up to 28cfm of compressed air for running most professional spray guns and air tools. Specification also includes safety valve, pressure gauge, air outlet valve & drain tap. 28cfm air displacement from 2 x twin cylinder. Air compressor pumps with aftercoolers. 2 x 3HP, 230V 1ph motors with overload protection. Sequentially starting motors allow the unit to be run from 230v, 1ph power supply (30 amp minimum). 10.3bar (150psi) max. Working pressure controlled by fully automatic pressure switch. : 1570 x 350 x. If in doubt then PLEASE GET A QUOTE before purchasing an item. A signature is required for collection. Any changes to address after checkout will not be considered as valid. The courier may require your assistance unloading from the vehicle for heavy and bulky items. Please bare this in mind when ordering the larger heavier items. Our couriers deliver to the property entrance only. You have the right to cancel for any reason without penalty. To cancel a contract you must give us notice within 7 days starting from the day after you receive your order. You have a legal “duty of care” to take good care of the goods. You must return the goods to us at your expense to our address below. Please check with us before placing your order. Terms and Conditions of sales. All sales are subject to the following trading terms- these terms and conditions do not affect the consumer’s statutory rights. We guarantee that the goods that we supply will be to the correct specification as advertised, however we are unable to guarantee precise compatibility or suitability. It is the responsibility of the customer to check this prior to ordering. We try to insure that all information provided is as accurate as possible. We reserve the right to accept or reject any order for any reason whatsoever. No order will be considered binding unless and until it is accepted by us. We will give you an estimated date of dispatch for your order. All goods are offered subject to stocks and availability.

]]> https://litreaircompressor.com/2025/03/clarke-industrial-air-compressor-xe29-270-ol-28cfm-270-litre-230v/feed/ 0 https://litreaircompressor.com/2025/01/clarke-xp15150-15cfm-150-litre-6-5hp-petrol-industrial-air-compressor/ https://litreaircompressor.com/2025/01/clarke-xp15150-15cfm-150-litre-6-5hp-petrol-industrial-air-compressor/#comments Sun, 26 Jan 2025 18:57:42 +0000 https://litreaircompressor.com/2025/01/clarke-xp15150-15cfm-150-litre-6-5hp-petrol-industrial-air-compressor/


This Clarke Air Compressor is Honda engine driven, and with a robust & heavy duty compressor pump, the XP15/150 is an ideal choice for numerous commercial operators who require a reliable source of compressed air on site and remote from mains electricity. Manufactured to the latest European specifications, includes receiver pressure gauges & receiver drain tap. 15 cfm air displacement from an aluminium compressor pump with aftercooler. 150 Litre air receiver tank (CE certified). 6.5 HP genuine Honda petrol engine (Recoil start). 7 Bar (101psi) maximum working pressure. Built to the latest European Standards specifications, fully tested & certified. Dimensions (LxWxH): 1380 x 390 x 850mm. A hire subscription contract for the product is secured with a security deposit.

]]> https://litreaircompressor.com/2025/01/clarke-xp15150-15cfm-150-litre-6-5hp-petrol-industrial-air-compressor/feed/ 0 https://litreaircompressor.com/2024/11/clarke-air-compressor-14cfm-150litre-3hp-industrial-400v-xe15150-2092252/ https://litreaircompressor.com/2024/11/clarke-air-compressor-14cfm-150litre-3hp-industrial-400v-xe15150-2092252/#comments Sun, 10 Nov 2024 07:04:32 +0000 https://litreaircompressor.com/2024/11/clarke-air-compressor-14cfm-150litre-3hp-industrial-400v-xe15150-2092252/


The XE15 industrial air compressor offers long term reliability and performance for a wide variety of commercial users. Built in overload protection ensures maximum motor safety whilst the solid construction of this highly efficient, slow running,’V’ belt drive unit affords dependable service the world over. It is recommended that this air compressor is fitted with heavy-duty anti vibration floor mountings. 14cfm displacement – twin cylinder aluminium air compressor pump with after cooler. 150 litre air receiver (CE certified). 3hp, 400V 3ph motor with wired in starter for overload protection. 10.3bar (150psi) maximum working pressure controlled by fully automatic pressure switch. Specification also includes safety valve, pressure gauge, air outlet valve & drain tap. Dimensions (LxWxH): 1330 x 420 x 850mm. The exceptions being that if we don’t send you the item you ordered or the item we sent you is faulty or damaged, in which case we will pay these costs.

]]> https://litreaircompressor.com/2024/11/clarke-air-compressor-14cfm-150litre-3hp-industrial-400v-xe15150-2092252/feed/ 0